Panasonic Pt-Lw373 Projector – White

Description

– Power Supply: AC100-240V 3.5A 50/60 Hz
– Power Consumption: 300W 6W when Standby mode set to Normal, 0.5W when Standby mode set to Eco*1
– LCD Panel | Panel Size: 15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)
– LCD Panel | Display Method: Transparent LCD panel (x 3, R/G/B)
– LCD Panel | Drive Method: Active matrix method
– LCD Panel | Pixels: 1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels
– LCD Panel | Pixel Configuration: Stripe
– Lens: Manual zoom (1.2x), manual focus F 1.6- 1.76, f 19.16- 23.02 mm
– Throw Ratio: 1.48- 1.78:1
– Lamp: 230 W UHM lamp
– Lamp/Filter*2 Replacement Cycle-L Normal: 5,000hrs / Eco1: 6,000hrs / Eco2: 10,000hrs
– Screen Size: 30-300 inches (0.76 -7.62 m) diagonally, 16:10 aspect ratio
– Colours: Full colour (16,777,216 colours)
– Brightness*3: 3,600 lumens (lamp power: normal)
– Centre-to-Corner Uniformity*3: 80%
– Contrast*3: 16,000:1 (all white/all black, Image mode: Dynamic, Lamp control: Normal, Iris: On)
– Resolution: 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.)
– Optical Axis Shift: 13:1(fixed)
– Keystone Correction Range Vertical: ±30°, horizontal: ±15°
– Installation: Ceiling/floor, front/rear (menu selection)
– Built-in Speaker | Output Power: 10 W (monaural) x 1
– Terminals | HDMI In: HDMI 19-pin x 1, HDCP and Deep Colour compatible Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
– Terminals | Computer (RGB) 1 In: D-sub HD 15-pin (female) x 1
– Terminals | Computer (RGB) 1 In | R, G, B: R, G, B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative automatic)
– Terminals | Computer (RGB) 1 In | Y, PB (CB), PR (CR): Y: 1.0 Vp-p (including sync signal), 75 ohms PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
– Terminals | Computer (RGB) 1 In | S-Video: Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
– Terminals | Computer (RGB) 2 In: D-sub HD 15-pin (female) x 1
– Terminals | Computer (RGB) 2 In | R, G, B: R, G, B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL (positive/negative automatic)
– Terminals | Monitor Out: D-sub HD 15-pin (female) x 1
– Terminals | Monitor Out | R, G, B: R, G, B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL (positive/negative polarity compatible)
– Terminals | Video In: Pin jack x 1, 1.0 Vp-p, 75 ohms
– Terminals | Audio In 1: M3 (L, R) x 1, 0.5 Vrms
– Terminals | Audio In 2: Pin jack x 2 (L, R x 1), 0.5 Vrms
– Terminals | Audio Out: M3 (L, R) x 1 (monitor out: 0- 2.0 Vrms, variable)
– Terminals | Serial In: D-sub 9-pin (female) x 1, for external control (RS-232C compliant)
– Terminals | LAN: RJ-45 x 1, for network connection, compliant with PJ-Link™, 100Base-TX/10Base-T
– Terminals | USB: USB A (type A) connector x 1, for Memory Viewer/Wireless Module (Out put 5V MAX 500mA) USB B (type B) connector x 1, for USB Display
– Power Cord Length: 1.8 m (5 ft 11 in)
– Cabinet Materials: Moulded plastic
– Operation Noise*3: 37 dB (Lamp power: Normal), 33 dB (Lamp power: Eco1) 28 dB (Lamp power: Eco2)
– Operating Temperature: 5°C-40°C (41°F-104°F) [at less than 1,400 m (4,593 ft.) ;[High land]:[off] 5°C-35°C (41°F-95°F) [at 1,400 m to 2,700 m (4,593 ft. to 8,858 ft.);[High land]:[on１] 5°C-30°C (41°F-86°F) [at 2,700 m to 3,000 m (8,858 ft. to 9,843 ft.);[High land]:[on２]
– Operating Humidity: 20%-80% (no condensation)
– Note: *1 When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate. Also, only certain commands can be received for external control using the serial terminal. *2 Usage environment affects the duration of filter. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 With legs at shortest position. *5 Average value. May differ depending on models. *6 Operation range differs depending on environments.
– Brightness: 3600 lumens
– Technology: LCD